Humans can get by in the most basic of shelters, can scratch together a meal from the most humble of ingredients. But we can’t survive without clean water. And in places where water is scarce—the world’s deserts, for example—getting water to people requires feats of engineering and irrigation that can be cumbersome and expensive.
A pair of new studies from researchers at The Ohio State University offers a possible solution, inspired by nature.
“We thought: ‘How can we gather water from the ambient air around us?'” said Bharat Bhushan, Ohio Eminent Scholar and Howard D. Winbigler Professor of mechanical engineering at Ohio State. “And so, we looked to the things in nature that already do that: the cactus, the beetle, desert grasses.”
Their findings were published Dec. 24 in the journal Philosophical Transactions of the Royal Society. The works were co-authored with Ohio State Ph.D. student Dev Gurera and with Ohio State engineering researcher Dong Song.
Bhushan’s work focuses on finding nature-inspired solutions to societal problems. In this case, his research team looked to the desert to find life that survives despite limited access to water.
The cactus, beetle and desert grasses all collect water condensed from nighttime fog, gathering droplets from the air and filtering them to roots or reservoirs, providing enough hydration to survive.
Drops of water collect on wax-free, water-repellant bumps on a beetle’s back, then slide toward the beetle’s mouth on the flat surface between the bumps. Desert grasses collect water at their tips, then channel the water toward their root systems via channels in each blade. A cactus collects water on its barbed tips before guiding droplets down conical spines to the base of the plant.
Bhushan’s team studied each of these living things and realized they could build a similar—albeit larger—system to allow humans to pull water from nighttime fog or condensation.
They started studying the ways by which different surfaces might collect water, and which surfaces might be the most efficient. Using 3-D printers, they built surfaces with bumps and barbs, then created enclosed, foggy environments using a commercial humidifier to see which system gathered the most water.
They learned that conical shapes gather more water than do cylindrical shapes—”which made sense, given what we know about the cactus,” Bhushan said. The reason that happens, he said, is because of a physics phenomenon called the Laplace pressure gradient. Water gathers at the tip of the cone, then flows down the cone’s slope to the bottom, where a reservoir is waiting.
Grooved surfaces moved water more quickly than ungrooved surfaces—”which seems obvious in retrospect, because of what we know about grass,” Bhushan said. In the research team’s experiments, grooved surfaces gathered about twice as much water as ungrooved surfaces.
The materials the cones were made out of mattered, too. Hydrophilic surfaces—those that allowed water to bead up rather than absorbing it—gathered the most water.
“The beetle’s surface material is heterogeneous, with hydrophilic spots surrounded by hydrophobic regions, which allows water to flow more easily to the beetle’s mouth,” Bhushan explained.
The research team also experimented on a structure that included multiple cones, and learned that more water accumulated when water droplets could coalesce between cones that were one or two millimeters apart. The team is continuing those experiments, Bhushan said.
The work so far has been done on a laboratory-only level, but Bhushan envisions the work scaled up, with structures in the desert that could gather water from fog or condensation. That water, he thinks, could supplement water from public systems or wells, either on a house-by-house basis, or on a community-wide basis.
There is precedent for the idea: In areas around the world, including the Atacama Desert in Chile, large nets capture water from fog and collect it in reservoirs for farmers and others to use. Those nets might not be the most efficient way of harnessing water from the air, Bhushan believes.
“Water supply is a critically important issue, especially for people of the most arid parts of the world,” Bhushan said. “By using bio-inspired technologies, we can help address the challenge of providing clean water to people around the globe, in as efficient a way as possible.”
Dev Gurera et al, Designing bioinspired surfaces for water collection from fog, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences (2018). DOI: 10.1098/rsta.2018.0269
Inspired by a desert beetle, cactus and pitcher plant, researchers design a new material to collect water droplets
February 24, 2016
Organisms such as cacti and desert beetles can survive in arid environments because they’ve evolved mechanisms to collect water from thin air. The Namib desert beetle, for example, collects water droplets on the bumps of …
Researchers invent nano-coating for synthetic leather that cleans itself—and won’t get sticky on a hot day
April 23, 2018
If you’ve ever stained your favorite leather-look jacket or had to peel your bare legs from a sticky vinyl car seat in the summer, the solution to your woes just might be found on the surface of a lotus leaf.
March 30, 2018
By learning how water is collected by living organisms, including rice leaves and pitcher plants, scientists at The University of Texas at Dallas created and tested a combination of materials that can do the same thing, but …
June 6, 2006
Beetles that harvest water from desert air have inspired the creation of printable surfaces that improve on nature with the aid of glass nanoparticles. These surfaces could also help control the flow of microscopic amounts …
November 19, 2018
When Konrad Rykaczewski moved to Arizona’s Sonora Desert region six years ago he took a water bottle and sprayed the plants in his front yard, not to water them, but to see how they interacted with water droplets.
January 19, 2005
Ohio State University engineers are designing super-slick, water-repellent surfaces that mimic the texture of lotus leaves.
The patent-pending technology could lead to self-cleaning glass, and could also reduce friction …
December 26, 2018
Humans can get by in the most basic of shelters, can scratch together a meal from the most humble of ingredients. But we can’t survive without clean water. And in places where water is scarce—the world’s deserts, for example—getting …
December 26, 2018
Hydrogen fuel cells are a promising technology for producing clean and renewable energy, but the cost and activity of their cathode materials is a major challenge for commercialization. Many fuel cells require expensive platinum-based …
December 21, 2018
Greg McKenna, Horn Professor and the John R. Bradford Chair in the Department of Chemical Engineering in Texas Tech University’s Edward E. Whitacre Jr. College of Engineering, has published his paper, “Testing the Paradigm …
December 21, 2018
Researchers from the University of Houston and the Toyota Research Institute of America have discovered a promising new version of high-energy magnesium batteries, with potential applications ranging from electric vehicles …
December 21, 2018
As a non-noble metal, copper oxidizes more easily to a positive valence (Cu+ or Cu2+) than same-family elements Au or Ag. In general, this chemical property is mainly determined by electron structure. Can we change the chemical …
December 21, 2018
Vibrating carbon monoxide molecules adsorbed at the surface of a salt crystal stop moving after a few milliseconds. Scientists now discovered this is dominantly due to the emission of electromagnetic waves. The role of the …
Adjust slider to filter visible comments by rank
Display comments: newest first